Description
An air source heat pump can be seamlessly connected to the plumbing of a
hot tub. Heat pumps are the preferred and optimal heat source for the
energy-efficient operation of hot tubs.
This means that when the hot tub needs to be heated, it will use an air
source heat pump instead of a 3KW heating element as it is more cost effective,
saving you money.
An air source heat pump takes the ambient temperature of the outside air
and transfers the existing thermal energy from the outside into your hot tub.
This makes them more efficient than the electric heating elements that come
with hot tubs because it provides more heat than they consume.
Features:
1. Compatible with:
Earth Spa Collection with Spa
2. Installation:
Hot tub can be installed or added later, simple "plug and
play" heat pump
3. Mode:
6 different heating and cooling modes
4. Cost:
Reduce operating costs by up to 73%
5. Refrigerant:
R32 environmentally friendly refrigerant, will not deplete ozone
6. High quality polymer:
Corrosion and UV resistant housing
7. Digital control panel:
Simply set the desired pool temperature and the heat pump will turn on
and off as needed to maintain the desired pool temperature.
Hot Tub Air Source Heat Pump Specifications:
Wattage: 900W
Max power: 3000W
COP: 3.3
Consumption: 4.2
Power supply: 220/230V / 1Ph / 50 Hz
Operating temperature: -5 to 40 ° C
Hot water temperature: 60 ° C Max
Compressor: Hitachi/Panasonic/Sanyo
Refrigerant gas: R410A
Controller: LCD
Cooling: Ventilated active 25W
Noise emission: 48Db (A)
Hydraulic connections (inch): G3/4 "
Connections refrigerant gas (inches): 1/4 "and 3/8"
Outdoor (without balloon) unit dimensions: 600 x 300 x500mm
Pack (without balloon) dimensions: 755 x 325 x 530mm
Net weight: 24kg
Total weight: 28kg
