Description
Air-to-water heat pumps take heat from outdoor air and transfer it to
water, which is then used to heat a home or domestic hot water. Modern heat
pumps can extract heat from the air even at low ambient temperatures, so they
can work almost year-round.
An air-to-water heat pump is designed to provide hot water heating in
winter, but it can also provide cold water cooling in summer. If you use a fan
coil unit, this heat pump can be used for both cooling and heating. A separate
air conditioning unit is not required.
DC Inverter Technology
The heat pump adopts DC frequency conversion technology, and the
compressor can adjust the power according to the actual needs. This prevents
the house from overheating, mainly when the outside temperature is around 0°C.
Inverter technology is the main advantage of heat pumps with on/off compressors
that always run at maximum capacity.
The compressor is located in the outdoor unit, so the indoor unit is as
quiet as possible. The water pump is the only moving part in the indoor unit.
The outdoor unit has two fans. As a result, the fan can run at a lower speed
and the outdoor unit is less noisy.
Integrated Air-to-Water Heat Pump Features:
1. Panasonic DC Inverter Rotary Compressor
2. High quality water pump
3. Integrated expansion tank and safety valve
4. Electronic expansion valve
5. Refrigerant R410A
6. Integrated 6 kW electric heater
7. Outlet water temperature 55°C
Intelligent control system
Not only the refrigerant circuit, but also the heating system can be
controlled by the heat pump control system. The user can activate the weather
compensation mode to adjust the outlet water temperature according to the
outdoor temperature. When the outside temperature is higher, the heat pump will
provide lower water temperature and work with better COP.
In summer, the control system can close the valve of the radiator or
floor heating and use only the fan coil for cooling. As a result, these units can
provide comfort year-round, whether in winter or summer.
Split Air-to-Water Heat Pump Advantages:
Indoor unit
1. Wall mounted - takes up less space than fixed units
2. Integrated expansion tank and safety valve
3. User-friendly interface
4. Backlit display
5. 6 kW integrated electric heater
6. Very quiet operation
7. Automatic exhaust valve
8. Easy installation
The outdoor unit
1. Optimized fan grille to improve efficiency
2. Connection valve inside the unit - the unit has a better appearance
and is not disturbed
3. Large surface of the evaporator, more efficient heat transfer
4. Insulate components to prevent frost
5. Low noise
Our strength is quality heat pumps at affordable prices. We have a very
wide range of heat pump products and are well stocked throughout the year. If
you need a quality heat pump, please contact us.
