Description
The commercial heat pump water heater range
brings the right combination of energy efficiency and affordability to the
commercial hot water market.
The heat
pump water heater extends its tradition of unparalleled flexibility in heating
capacity with a powerful heat pump module that ensures ongoing savings in
electricity and operating costs.
This
balance of design ensures that any commercial establishment using hot water in
its operations has a ROI worth evaluating.
The 120
gallon has at least 50% more storage capacity than any other hybrid or
integrated heat pump water heater on the market today. Large storage bumps
ensure that more hot water is produced through the heat pump module over the
years.
Feature:
1.
Efficient renewable energy technologies
The
water heater is an efficient, energy-saving and environmentally friendly
device. When operating in energy saving mode, users can save up to 70% on their
electricity bills compared to traditional electric water heaters.
2. AES
(Adaptive Energy Saving System) function
The
water heater features a unique AES feature that allows for a heating cycle
based on the user's water habits. This enables the water heater to
automatically turn on when needed, saving energy by minimizing heat loss.
3. Blue
Diamond Glass Lined Jar
This
water heater comes with a special glass-lined water tank. The lining prevents
corrosion of the tank and prolongs the life of the water heater, which is
achieved through a specialized fusion process.
Tanks
are designed to pass 100,000 cycle fatigue tests. This makes it one of the best
tanks for rust and scale protection.
4.
External Coil Heat Exchanger
The
large surface area of the heat exchanger efficiently transfers heat from the
refrigerant to the water.
5.
Double Wall Refrigerant Isolation
The
refrigerant is isolated from the water on both sides, providing additional
safety and protection to the water heater.
6.
Glass-lined electric heating element
Dual 3kW
backup heating elements aid in quick heating.
7. Super
thick insulation
Tank insulation
minimizes stand-by heat loss, so the hot water produced stays longer and
reduces energy demand.
8. Wired
remote control LCD display
Digital
user interface provides easy access to temperature, function and mode settings.
9.
Adjustable Mode Settings
The
water heater can be set by the user to operate in different energy modes:
Efficiency mode prioritizes the use of the heat pump module; High demand mode
combines heat pump and electric elements for ultra-high recovery rates
10. High
temperature limit protection switch
This
water heater adopts high temperature limit protection switch. In case of
failure and the water temperature exceeds the maximum preset temperature, the
switch quickly cuts off the phase and neutral lines at the same time to ensure
safety.
11.
Safety valve
The
safety valve of the water heater has been set at the factory and cannot be
adjusted by the user. The safety valve must be installed at the water inlet
pipe of the water heater.
When the
piping system exceeds the rated pressure, the valve will automatically relieve
pressure. The drains of the safety valve and the condensate pipe should be
connected to the floor drain through a three-way drain pipe.
12.
Sacrificial anode rod
The
anode rod protects the glass lining in the water tank and prolongs the service
life of the water heater.
13.
Waterproof outdoor design
Can be
installed in outdoor environments, giving you more flexibility in where to
install.
Specifications:
Nominal
Capacity: 120
Rated
Storage Volume: 122
UEF 3.45
First
Hour Rating: 86
Upper
Element Wattage: 4500
Lower
Element Wattage: 4500
Max
Wattage: 4500
Voltage:
208
Minimum
Voltage Required: 208
Anode:
Sacrificial
Foam
Insulation: 2"
T&P
Relief Valve: Yes
Water
Connection Location: Side
Water
Connection Size: 3/4"
LEED
Rating: 2
ENERGY
STAR Certified: Yes
NEEA
Certified: Yes
Digital
Display: Yes
Connectivity
Yes
Dimensions
& Venting
Type:
Tall
Height:
69"
Diameter:
27"
Width:
27"
Depth:
27"
Product
Weight: 264
Shipping Weight: 307lbs/139kg
