Daily Care and Maintenance of Air Source Heat Pumps

Professional knowledge sharing on daily maintenance of air source heat pumps. If an air source heat pump is used well and correctly, its service life can be as long as 15 to 20 years. Let's follow Leomon heat pump to understand the maintenance and maintenance instructions of air source heat pumps.

1. When using air source heat pumps normally, pay attention to protecting the equipment and do not adjust the parameter setting values at will.

2. Regularly check the working conditions of each component of the unit and check whether the working pressure of the unit system is normal. If there is any abnormality, it should be repaired and replaced in time.

3. Check the reliability of electrical and water circuit components and replace faulty components in time.

4. When replacing parts, use the accessories provided or recommended by the manufacturer. Do not replace parts that do not meet the requirements at will.

5. Check the electrical wiring regularly. If there are loose contact points, oxidation or debris blocking, etc., which cause poor contact of electronic wires, they must be handled in time.

6. Inspection and cleaning of the finned heat exchanger of the air source heat pump. To ensure that the heat exchanger maintains the best condition for heat exchange, its exterior must be kept clean and no debris blocks the heat exchanger fins.

7. When the water heater is not used for a long time, especially in areas with low temperatures (below 0°C), the water in the water heater should be drained to prevent the water in the inner tank from freezing and causing damage to the water heater.

8. When the air source heat pump has enough hot water, it is recommended that the user lower the set temperature, which can reduce heat loss and scale generation, save electricity, and extend the service life of the water heater.