Heat Pump Adjust Temperature Tips
With the air source heat pump system, you can use a more energy -saving way to hear your home, which is very friendly for your wallet. But the working method of the heat pump is slightly different from the traditional thermostat. Find these useful tips to find the temperature settings suitable for your family, and make sure your system work as normal as possible.
Working principle of heat pump
Before you jump directly to the settings, it is important to understand what your new heat pump system is so different from other thermal rooms you may use in the past.
Traditional stoves with gas as the power work by generating heat, and heat is pushed into your home through the pipeline of the furnace fan. Your heat pump also has a pipeline, but it does not blow the air through the pipeline regularly. Instead, the pump is constantly moving the air.
The heat pump absorbs heat from the outside and guides it to home. capture? They can only do so when the outdoor temperature is higher than the freezing point. When the temperature is indeed lower than the freezing point, the heat pump uses their spare elements, which will consume a lot of electricity.
The ideal heat pump temperature setting
Finding the temperature setting that is most suitable for your home on your heat pump system is really only you can measure. However, according to the Department of Energy, you should try to keep your system at 68. This temperature should make you feel comfortable and make your system run efficiently when someone at home and your family wake up. With this as the starting point, you can use the following prompts to adjust from there.
Concentrated temperature setting
The gas furnace is intermittently winding through the pipeline system to warm the house. However, since they do not constantly send hot air into your home, the hot air released by them is usually warmer than the air produced by the heat pump.
The furnace is traditionally accumulated with 120 degrees, and the heat pump will use air between 90 and 100 degrees. Keep in mind that when you set the temperature with the heat pump, it is slightly effective because the air is constantly guided to the home. You should aim at the temperature setting of the heat pump that shows the feeling you really want.
The heat pump requires a longer cycle
Different ways of heat pump and gas furnace are that the heat pump is more efficient at running. For this reason, no matter where you set the heat pump, you can expect its running time to grow more than the loop settings of the furnace.
Just like choosing a new perfect temperature, you must go through repeated tests to find the settings that are most suitable for you and your home.
Don't care about your thermostat
The homeowner with a wind furnace may spend a lot of time to find a way to save system funds. This process usually means keeping their thermostat at the lower temperature as much as possible to save funds. However, this method is invalid for the heat pump system.
Compared with the gas furnace -driven system, these systems need more time for family heating, which means that they naturally take longer. In addition, if you set the temperature too low, this may mean that the spare element of the heat pump will be started, which will consume more power, not less. Third, aim at the temperature you really want your home, and then adjust it from there.
Contact us
Following these tips will help you save expenses and improve comfort to the greatest extent. If you have other needs, please contact us. We provide professional support and help.
