Description
We are
proud to announce the launch of our new Inverter range of Inverter Driven Pool
Heat Pumps
Inverter-driven
heat pumps allow fans and compressors to operate at variable speeds from 25% to
100%, depending on the load.
When
initially turned on, the heat pump will run at 100% to warm up the pool.
Once the
pool reaches the desired temperature, the inverter heat pump can step down and
match its output to keep the pool at the desired temperature.
The
ability of a heat pump to adjust its output to suit the needs of the swimming
pool can result in significant cost savings.
2.
Features
1.
Inverter technology - variable operating speed
2.
Energy saving
3.
Extremely quiet operation - only 22-35db(A) at 10m (depending on model and
power output mode)
4.
Reduced start-up current - no soft-start required
5.
Mitsubishi inverter compressor
6. Brushless
fan motor
7. Works
up to -7c
8. TUV
certified output
9.
Aluminum alloy anti-rust shell
10.
Excellent COP - from 6.4 to 16.0 due to inverter technology
11.
Includes 1.5" to 50mm adapter bushing
12. Wifi
control option to allow control from smartphone
13.
Includes 1.5" to 50mm adapter bushing
3. WiFi
Options
The
Inverter+ heat pump has an optional wifi module.
This
then allows the heat pump to be controlled and monitored via a smartphone app
4.
Installation
Installation
is simple. We can provide advice on installing heat pumps. We can also provide
installation services if required.
5.
Warranty
These
Inverter+ heat pumps come with the following warranties:-
3 years
general warranty
Heat
Exchanger and Compressor 10 years
HeatPumps4Pools
also has a network of engineers who can maintain or repair any heat pump
Warranty
when the device is installed in accordance with the manufacturer's
instructions.
6.
Specifications:
Size: 3kw, 5kw, 7kw, 9kw, 10kw, 14kw, 15kw, 16kw, 20kw, 27kW, 41kW, 49kW, 95kW and 115kW, etc
|
Model |
LMP-015 |
|
Rated heating capacity |
5.5kW |
|
BTU |
18771 |
|
Rated input power |
0.99kw |
|
Rated heating input current |
4.5A |
|
COP |
5.2KW |
|
Max running current |
7.0A |
|
Power source |
220V/50Hz |
|
Noise level |
40dB(A) |
|
Width |
750mm |
|
Depth |
300mm |
|
Height |
510mm |
|
Weight |
65kg |
|
Water temperature control precision |
±2℃ |
|
Working environment |
-15℃~43℃ |
|
Throttle type |
Electronic expansion valves |
|
Refrigerant |
R417A, R407C,R410A |
|
Compressor |
hitachi |
|
Compressor |
1Pcs |
|
Heat exchange type |
Efficient finned tube exchanger |
|
Motor power fan type |
Axial flow fan |
|
Motor power |
0.1kw |
|
Heat exchanger |
High titanium tube heat exchanger |
|
Water flow |
1.9m3/h |
|
Water pressure drop |
10kPa |
|
Connect pipe size |
1Inch |
|
Water size max work pressure |
600kPa |
