Description
9kW pool heat pump now with ABS rust free casing and 15 amp lead and plug.
Recommended
for spas and pools up to 40,000 liters
Easy to
install
Plumbing
installation can be done yourself or by a local plumber if it is convenient for
you.
Swimming
all year round
Stay
healthy, have funds and get full year value from your pool investments
Economical
and quiet operation
Pool
heat pumps are highly efficient, converting the electricity used and returning
five times or more of the energy as heat.
Features
1. ABS
cabinet
2.
Automatic flow switch
3.
Titanium heat exchanger
4.
Automatic heating and cooling
5. Quiet
operation
Important!
1. All
heat pumps are tested and certified to AS/NZS 60335
2.
International standards specific to heat pumps.
3. Don't
put your family's safety at risk.
4.
Purchase only certified heat pumps.
5. Any
heat pump that is not tested by an accredited body and meets the requirements
of international standards is potentially dangerous.
6. Only
sellers who can provide an accredited certificate can truly meet international
standards.
7. Some
sellers claim they are compliant, this does not mean tested and certified.
8. We
use and have certificates from SGS and TUV
Economical
and quiet operation
Pool
heat pumps are highly efficient, converting the electricity used and returning
five times or more of the energy as heat.
This
unit only needs 1.7KW of power input to return 9KW+ heat output. (The heat
output will increase with the outside temperature). Another way to look at it
is that for every $1 of electricity input, you'll get $5-6 more in heat! This
is compared to a resistive heater, such as your spa, which heats one element
and returns only 1 kW of heat for every 1 kW of electricity, or only $1 of heat
for every $1 you spend.
Running
a heat pump is also much cheaper than electric or gas heating, saving up to
75%, solar heating on a roof requires a lot of plumbing, requires a pump to
run, can be unsightly, and needs sunlight! You can run your pool heat pump 24/7
quietly and economically in the cold and without the sun! They will work from
-15 degrees Celsius to +43 degrees Celsius. This pool heat pump is also quiet
at 50 DB(a)
Just
turn it on!
*Cost to
produce 1 million BTU of heat, comparison percentages and prices will vary.
Install
Plumbing
installation can be done yourself or by a local plumber if it is convenient for
you.
Using
40mm high pressure PVC pipe (grade 12 - 50mm outside) simply connect your pool
heat pump inlet and outlet to your pool filtration system outlet and inlet,
after your pool pump.
A bypass
valve is required to balance the flow of water through the pool heat pump for
optimum performance.
Then
have an electrician install a suitable power source on his own circuit with the
RCD and turn it on!
How they
work
Pool
heat pumps work exactly the same way as your air conditioner or refrigerator,
even in winter, they extract ambient temperature from the surrounding air. This
heat is absorbed by the refrigerant gas, compressed and heated further, and
then instead of heating the air like an air conditioner, it heats the water
through a titanium heat exchanger coil and returns it to your pool.
Heat
Pump Location
The
device will work in any desired location as long as the following three items
are present:
1. Fresh
Air
2.
Electricity
3.
Swimming pool filter
The unit
can be installed in almost any outdoor location as long as the specified
minimum distance from other objects is maintained. Consult your installer to
install an indoor swimming pool. Installation in a windy place will not present
any problems at all.
What is
included
(1)
Swimmax 7 kw heat pump x1
(2)
Barrel Connector x2
(3) 10m
Cable - Controller x1
(4) Aus
standard plug and cable x1
(5)
Instruction manual x1
Specifications:
Heat
Exchanger: Titanium
Heating
Capacity: 9kW
Rated
Power Input: 2.25kW
Power
Supply: 220V/Single Phase/50Hz
Compressor
Type: Rotary
Number
of Fans: 1
Fan
Type: Axial
Fan
Direction: Horizontal
Refrigerant:
R 410A
Water
Temperature Limit: 40 Degree Celsius
Ambient
Air Temperature Limit: -5 to 43 Degree Celsius
Water
Inlet Diameter: DN 25mm
Water
Outlet Diameter: DN 25mm
Noise
Level: 60 dBA
Unit
Size: 975X440X750/
Unit Weight: 71 Kg
